Switch Mode

Monster Factory Chapter 488

Chapter 488: Live Ammunition Tes

Five minutes earlier, the technicians had rolled up their sleeves and got ready to argue with the Master Craftsman standing aside, but after the test, he has told them comfortably in front of their old manager: "Little comrades, the gear you brought seems to be a bit out of class.", and now, they can't even lift their heads, and Master Qiao continued: "If you are embarrassed to speak, then continue to work.".

When they tried to open the box to use a high-precision instrument to measure the parts and electronic components inside the robot, as a result, at the first level, they encountered a problem and they couldn't remove the mechanical moving device from inside. It was a structure they hadn't seen before. It was made up of pushrods and joint-like hemispheres, which were tightly integrated.

"What can you say about this component?" The Master Craftsman standing on the side laughed and looked at their twitched.

"We will strictly test!"

"Okay… You… Don't care about hitting people." Ye Qing had quietly patted the Master Craftsman Qiao: "Go and help disassemble the parts inside."

To disassemble these parts, special tools were needed to do this work. Of course, these tools are already on the test bench.

In the hands of the Master Craftsman Qiao, these internal structures were originally incomprehensible, but in his hand, were like a packaging box, have been disassembled with skill, into a pile of pieces.

The inspection continued, and they did not specify the size of the internal parts, but this did not prevent them from looking at the surface of the mechanical parts, material hardness, wear resistance, deviation of repeated parts, etc., to get a glimpse of the extraordinary features of these parts, they were also inspected the internal electronic components detection, contact resistance, insulation resistance, withstand voltage and so on, and the recorder had recorded the inspection status of each part in the form. In addition to the data, he had also scored the parts based on the test results.

In fact, the scoring had no meaning, because they strictly followed the military-level standards. However, the quality of this set of products had already left this standard behind. Even if it was measured by the most demanding aviation-grade standards on the market, this set of products in front of them was also excellent among aviation-grade standards.

"How…how did you do it this?" The old director walked up to Ye Qing grotesquely, with some guilt in his confused eyes: "I'm really sorry, in the beginning, and I saw you so young. I… I just think one-sidedly your factory cannot make this kind of brand-new automatic aiming bracket in one day. I thought you would ask, how much is this product that meets aviation-grade standards?"

Ye Qing almost couldn't help laughing: "I know you get what you pay for, Director. It is not difficult to do this, because our Monster Heavy Industry has more than 600 five-axis machining centers."

"Ah, much… How much?" The old director violently rubbed his ears. He suspected he was old and had hearing problems.

"More than six hundred five-axis machining centers."

Ye Qing had repeated, this was not the answer to the real reason.

The five-axis machining center has an irreplaceable position in the hearts of people engaged in machinery. Especially in the hearts of the older generation of technical talents, when Western countries have not lifted the embargo, the five-axis linkage machine tool is the heaviest pain in everyone's mind. Even now, many mechanical processing plants are already satisfied if they can own one for processing core components.

The number of more than 600 units allowed the old Director to freeze on the spot. Even Demaghi, or Yamazaki Mazak, the world's top machine tool manufacturers, cannot have more than 600 five-axis machining centers.

To explain this in advance, there is an essential difference between Li Gui and Li Kui between five-axis CNC machine tools and five-axis linkage machining centers. Just like the domestic five-axis machine tool that Ye Qing had bought before, although it is also called a machining center, it is the Li ghost version of 3 + 2 that lacks five-axis linkage or lacks an automatic tool magazine system.

A true five-axis machining center refers to a top-level machine tool that processes one part, all working procedures are covered, and no manual intervention is required during the machining process. If this is impossible, if manual tool change and calibration are required during the machining process, only a 5-axis CNC machine tool can be used.

Seeing their surprised expressions, Ye Qing sighed.

Six hundred five-axes units are just the most common processing equipment in Monster Heavy Industries. Those excellent quality and rare were quality processing equipment with other attributes, the monsters, and metal smelting centers were the real core.

Therefore, the practice was the only criterion for testing the truth.

The previous competitions against each other and saying that it would not convince the other party.

In this test, Ye Qing didn't need to say anything, and only the other party should naturally realize the terrifying finishing ability of Monster Heavy Industries, including the old director. They were completely convinced and couldn't help themselves to say: "Okay, okay, now that the product has passed the inspection, let's enter the live ammunition test link." while clapping.

Yi Qing had taken the initiative to find a place for them to do the shooting test:: "Yes… Yes… Yes…"

The group of technicians was about to do amnesty and had quickly packed the outdated testing equipment.

After half an hour, the two groups of technicians from the company and the people from Ye Qing moved to the west of the Longxitan factory.

The live ammunition test site has been cleared by the monsters using Titan I. They had prepared a flat sandy ground. At the end of the sandy ground, wooden targets at 200 meters, 400 meters, and 600 meters were erected. Behind the targets was a short barren mountain, and bullets passing through them would only hit the barren mountain.

Huanhai Avenue was to the north a few hundred meters away, because of the undulating terrain, there was no temporary shooting range from the highway.

"Let's go first, Director. Let's go first." Seeing the shooting range, Deputy Manager Wang Lin said involuntarily and received a metal safe with the words 'Assault rifle' from the weapon safekeeping officer.

"Haha… The two hundred-meter live ammunition test preparations, the tester set the target, and the unrelated personnel hurried to find a bunker!" The deputy manager Wang Lin narrowed his happy eyes and hurriedly urged the weapons keeper to fetch the bullets.

The bunkers have also been built long ago. The Titan I dug a trench here, and a circle of steel plates surrounded the trench. People who were hiding in the trench could watch through the lookout holes on the steel plate. Those wooden targets are used for automatic aiming bracket testing.

Deputy manager Wang Lin's target was countless times more advanced. It was a warning robot. The technician had fixed the heavy warning robot next to the two-hundred-meter wooden target. Then trotted back and hid in the bunker.

"The test target is ready!"

"The shooting range is empty emptied of personnel and we can test!"

"The recorder is ready, load the guns."

Hearing this, Wang Lin, the deputy manager hiding in the shooting position, closed his AK assault rifle in his hand and closed the magazine with a bang.

The AK in his hand was a genuine product produced by the Izhevsk military factory, and the bullets were also imported from there. It could be seen that they had made sufficient preparations in order to test the dangers that the alert robot may encounter in the field.

After pulling the bolt again, the bullet was loaded. The deputy manager Wang Lin couldn't wait, raised his gun, and aimed at the security robot two hundred meters away.

"Panpan… Panpan… Panpan…"

There was a burst of crisp and rapid three shots, and three dazzling sparks burst out of the guard robot two hundred meters away. It seems that this guy's marksmanship is good; no one bullet missed the target.

Monster Factory

Monster Factory

Chao Ji Guai Shou Gong Chang, 超級怪獸工廠, 超级怪兽工厂
Score 8.5
Status: Ongoing Type: Author: , , Native Language: Chinese
I am Ye Qing. Lucky I found a [Monster Factory] application. This bunch of super strong monsters are individually comparable to over 100 human beings, and they bring all kinds of skills! Efficiency? With the skill processing speed +300, you still want to compete? Precision? *cough, cough* Bring me that legendary dial caliper, let’s show them what absolute precision really mean. Ye Qing: When, us, men want to be successful, we pull out our wallets. Monsters: Don’t play those malice games with us. The creation of ultimate machinery is our love and life. These impenetrable bodies are our tools of the trade. A 20 meter tall, overly buffed, savage looking monsters hold on to a ultimate cutting machine and yelled at the sky: “I am not targeting anyone specifically! Rather I am telling you all that, everything, in front of me and my tools are, nothing, but tr*sh!”

Comment

0 0 votes
Article Rating
Subscribe
Notify of
guest

0 Comments
Inline Feedbacks
View all comments

Options

not work with dark mode
Reset